3 x Backlight Indicator for Pioneer DSP DEQ-9200 DEQ-7600 DEQ-7200 DEH-P835 LCD

Description

3 x EL Sheet / backlight indicator
PLEASE SEARCH YouTube video here for how to install new backlight:
https://youtu.be/WtkF8p4G6a8
SHIPPING
Economy Shipping registered mail (USD10, 14 - 30 working days )
10 - 20 weeks or more (
Economy Shipping
) - normal registered mail with tracking number for Europe, Mauritius, Mexico, South America, Canada due to slow processing by your local courier and you need to pay for import tax. Also, tracking may not be available from
eBay
tracking system.
I can’t responsible for any delay or damage during the shipping.
No return no warranty.
You are responsible to pay for import duties / taxes and customs clearance if any, apply to ALL countries.
• All backlight tested and 100% working before shipped.
• All backlight require high voltage (100v / 400-2000hz) driver / actuator.
• All backlight only work with good condition driver / actuator of your EQ / Head Unit.
• Check your EQ / Head Unit LCD display, if totally dark / no display then nothing wrong with the backlight. It’s can be the driver / actuator faulty. Also, you can use voltage meter to test the voltage whether is good condition or not. Suggest to check electronic technician.
• If the driver faulty, you can DIY to install “external driver” connect directly to backlight ( ensure your EQ is good working condition except no display ). Message me for more information.
• If you’re no confidence enough to change the backlight, please look for electronic repair technician to check and change for you. Again, your own risk if damaged your unit by yourself.
This is custom made EL Sheet backlight indicator to replace those dimmed illuminate display and compatible for most of 90’s Pioneer models
DEQ-9200
DEQ-7200
DEQ-7600
DEQ-44
DEQ-99
DEQ-500
DEQ-700
DEH-P735, 823, 825, 835, 836
DEX-P78, 88, 98
KEH-P7400, 7450, 7600, 7650, 8200, 8400, 8450, 8600, 8650, 9200, 9250
KEX-P820
Please be understand that I do not know the brightness can be sustained for how long as I can’t test and wait for hundreds / thousands hours but tested for more than 200 hours.
You need to DIY to replace it with installation skill and your own risk for damaged your equipment if any.
Please take note:
- Do not connect it directly to power 12v as the EL Sheet required to operate with the actuator.
- EL sheet can not be cut to smaller size.’
- Please be careful when changing the backlight, use the faster method to solder it, do not keep high temperature as the 2 pins with melted the EL sheet and the pins will drop out.
Installation instructions:
1 - Unscrew, open the back cover. Slowly and use finger nail will do but remain upside down ( front panel face down), otherwise all buttons may dropped and quite complicated to fixed back the correct position.
2 - Remove LCD metal holder.
3 - Remove LCD, be careful the connector, should be together with LCD.
4 - Unsolder the 2 Pin Backlight.
5 - Remove backlight ( pink colour with black dots ), separate it between the backlight white holder.
6 - Replace new backlight to white backlight holder.
7 - Fix it back to circuit board, LCD, and LCD metal holder ( you can do the backlight soldering first then cover back ), follow by remove the plastic sheet protector ( plastic protector covered the pink colour side ).
8 - Use the faster method to solder it, do not keep high temperature for too long as the 2 pins with melted the EL sheet and the 2 pins will drop out. ( suggest to do it after step 6 )
9 - Fully locked the LCD metal holder to ensure LCD connector fully connected to circuit board, otherwise LCD may not be display properly.
10 - Before you cover back the back cover, adjust the “open” push button ( with spring ) into the hole between the back cover.
11 - Testing ok before you screw it back.
12 - If LCD display partially, possible the connector not fully connected to circuit board. Remove the LCD metal holder to slightly adjust the LCD/Connector again and follow to step “ 9 “ again. If totally no display, possible that the EL sheet damaged during the soldering and change another new backlight is needed.
124 - Sold to United States 🇺🇸
1 - Sold to Croatia 🇭🇷
4 - Sold to Mexico 🇲🇽
45 - Sold to Brazil 🇧🇷
1 - Sold to Hungary 🇭🇺
10 - Sold to Italy 🇮🇹
6 - Sold to France 🇫🇷
5 - Sold to United Kingdom 🇬🇧
3 - Sold to Russia 🇷🇺
1 - Sold to Argentina 🇦🇷
2 - Sold to Chile 🇨🇱
1 - Sold to India 🇮🇳
1 - Sold to Bahrain 🇧🇭
1 - Sold to Austria 🇦🇹
3 - Sold to Germany 🇩🇪
1 - Sold to New Zealand 🇳🇿
5 - Sold to Philippines 🇵🇭
2 - Sold to Belgium 🇧🇪
3 - Sold to Bulgaria 🇧🇬
3 - Sold to Peru 🇵🇪
1 - Sold to Guadeloupe 🇬🇵
1 - Sold to Finland 🇫🇮
1 - Sold to Portugal 🇵🇹
2 - Sold to Greece 🇬🇷
1 - Sold to Canada 🇨🇦
3 - Sold to Spain 🇪🇸
10 - Sold to Mauritius 🇲🇺