-40%
50х 0.1uf 650V 10% k73-11 (CL20) petp capacitor AUDIO СССР HQ
$ 7.91
- Description
- Size Guide
Description
Capacitors K73-11 (CL20) are polyethylene terephthalate metal film capacitors of constant capacity, accumulate a charge from 0.001 μF to 100 μF at a voltage from 50V to 160V.The capacity tolerance is ± 5%, ± 10%, ± 20%.
Designed for operation in DC, AC or pulsating current circuits.
The CL20 series capacitors are analogous to the presented K73-11 capacitors.
Capacitors K73-11 are distinguished by high capacitance values with miniature dimensions, non-inductive design, the ability of a dielectric to self-repair during breakdown, and increased moisture resistance.
The cylindrical case of capacitors is non-metallic, insulated, wrapped in a mechanically strong Mylar film, and at the ends is filled with thermoactive epoxy compound.
Axial type flexible lead wires.
Fastening of capacitors on a printed circuit board is carried out at the terminals using group soldering or a soldering iron.
Vertical mounting is allowed.
When bending the leads, the minimum distance from the body is 2 mm, and the bending radius is at least one and a half of the lead diameter.
The increased operating temperature of the environment is no more than + 85 ° С, the operating low temperature is not lower than -60 ° С.
The maximum tangent of the loss angle tgδ does not exceed 0.015, the limiting leakage current is 3μA.
The operating time is at least 10,000 hours.
Film capacitors K73-11 are resistant to vibration loads in the frequency range of 1-200Hz with acceleration up to 10g and mechanical shocks of single (acceleration up to 75g) or multiple (acceleration up to 40g) action.
The minimum value of the insulation resistance of the lead-to-housing type is 30,000 megohms, and the insulation resistance of the lead-to-lead type is not less than 12,000 megohms.
Low-voltage capacitors K73-11 are used in automated control systems, communication equipment, chargers, lighting, noise suppression devices, frequency modulation and other equipment.